Painting your helmet is a creative approach to personalize your headgear in your own way. Moreover, the custom helmet painting prices generally range between $600 and $750.
Now deviating from the regular approachability of the basic crafts, the helmet painting process requires a certain extent of complexity blended with an adequate amount of simplicity. Therefore, providing you with ample pointers here’s our guide on how to paint a motorcycle helmet.
Essential Things to Keep in Mind
As earlier mentioned, the custom helmet painting prices can burn holes in your pocket because the expense of buying paint and brushes is no more than $40. However, the complex process of choosing the right equipment or a modular helmet can be a headache for many.
Therefore, take a look at the following solutions for excelling in how to paint a motorcycle helmet.
Choosing the Right Motorcycle Helmet
At first, fix your priority on one.
- Modular motorcycle helmet
- Dual sport
- Open face helmet
- Full face
- Half shell
Then check its weigh (3.08-3.96 lbs), safety rating, safety features (emergency cheek pad system, MIPS), and technical features (wind reduction measures, sunshade).
Gathering all the Supplies
In order to be in the hold of a visually outstanding helmet, it is important to arrange the following ingredients.
- Fine-grit sandpaper
- Airbrush gun
- Vinyl tape
- Reducer or water
- Small needles
- Urethane clear paint
- 1500-2000 graded paper
- Buffing cloth
Choosing the Right Airbrush
The customized modular motorcycle helmet calls for a right airbrush and the airbrushes are differentiated depending on.
- Side feed, siphon feed, and gravity feed.
- Single action, dual action, and trigger action.
- Internal mix and external mix.
Always go for promising the brand manufacturers (such as Paasche, Iwata, or Badger) because they are likely to offer high-end features, dual action, internal mix, and gravity feed. Again, siphon feed is your option when it comes to one bottle per color or one airbrush per color setup.
Getting to Know how to Paint a Motorcycle Helmet
Every modular motorcycle helmet is different but the common work starts with disassembling headgear. Hence, the tutorial on how to paint a motorcycle helmet begins with taking out the removable plastics, screws, and lens.
Then you have to soak the sandpaper in water for 5 minutes and initiate sanding the helmet. Get rid of the actual varnish off entirely and then smoothen the scratches or dents with lower grit sandpaper.
Masking out Designs on Custom Full Face Helmets
According to the steps on how to paint a motorcycle helmet, it is important to mask-off any previous or remaining fitting. Take a quality paper with no printing and Vinyl tape (⅛ inch width, narrow tape for bending around unique shapes).
Then put the base coat and let it dry for avoiding further applications. When the coat dries up, apply your design freely.
Do not touch the surface for unnecessary grease spots. The perfect symmetry will add the perfect finishing touch to the custom full face helmets.
Using Airbrush on Modular Motorcycle Helmet
Get an airbrush gun (dual action recommended) to start the real fun of how to paint a motorcycle helmet. Do not forget to use the small needles for getting out the fine lines.
Also, add reducer to the paint for diluting the thickness. Water can be used for thinning but a non-porous helmet, the reducer is a wiser selection.
Utilizing Stencil for Designing
The stencils provide the perfect design contrasting to the high-end custom helmet painting prices. Follow the below-mentioned steps to develop the design.
- Take the stencil and place it against the helmet surface.
- Spray the shapes in different angles, as you wish. For example, if you take flame design, make sure the flame designs are pointing at different angles.
- Add a shadowing effect to the design by pulling back on the trigger of the airbrush gun. Experiment with the distance for making the paint edgy.
Putting Clear Coat on Modular Motorcycle Helmet
When the procedure of airbrushing is done, applying 8-10 light coats of urethane clear coat is a must. If there is one thick coat, the clear coat starts to run.
Therefore, it is better to keep spraying and adding layers frequently. The multiple layers ensure color-lock protection instead of getting washed away in rain.
It usually takes around 12-24 hours to dry up and then you have to wet sand for eliminating dust particles or any imperfections with 2000 grade paper. In the end, the whole surface is buffed, thanks to the polishing compound.
Reassembling every Part of Custom Full Face Helmets
The last step of how to paint a motorcycle helmet requires reassembling and reinstalling all the visors, screws, caps, and other parts.
Last Minute Takeaway
It is important to have a modular motorcycle helmet that suits your personality adequately. Henceforth, pick the stencil, mix the chemical paint, and use the airbrush gun carefully to finish the project on how to paint a motorcycle helmet efficiently.